How To Clean And Maintain Fiberglass Insulated Zone

As a high-quality thermal insulation material, Fiberglass Insulated Zone can effectively extend its service life through proper cleaning and maintenance. The following are professional suggestions:
Cleaning method:
Daily cleaning: Use dry compressed air or a soft brush to remove surface dust
Deep cleaning: For stubborn stains, use a neutral detergent (PH value 6-8) with a soft cloth to gently wipe
Oil stain treatment: When encountering oil stains, it is recommended to use a special solvent (such as isopropyl alcohol) for local cleaning
Prohibitions: Avoid using strong acid and alkali cleaners, high-pressure water guns or metal brushes to clean
Maintenance points:
Regularly check (recommended every 3 months) for damage, shedding or aging
Replace it in time when the surface glass fiber is exposed
Keep the storage environment dry and ventilated, and the relative humidity does not exceed 65%
It is recommended to cover with dustproof cloth when not in use for a long time
Avoid contact with sharp objects to prevent scratches
Precautions:
Wear protective gloves and masks when cleaning
Must be completely dry after cleaning before reinstalling and using
Frequent cleaning is not recommended, and excessive cleaning may damage the surface structure
Special working conditions (such as chemical environments) should shorten the maintenance cycle according to actual conditions
Through scientific maintenance, high-quality Fiberglass Insulated Zone can be used for 3-5 years. If there is obvious hardening, brittleness or reduction in insulation effect, it is recommended to replace it in time.